Aluminium Commercial and Domestic Door and Window Shutters
Where Aesthetic Appearance is paramount but Physical Security is a necessity, Tailor made aluminium roller shutters are the perfect choice to compliment office and home whilst deterring unwanted intruders.
Different size lath profiles ranging from 38mm (4000mm max width) to 60mm (6000mm max width) allows installations to suit wider opening applications.
For Domestic low security applications, which could include bars and serveries, a Double Skinned Foam filled aluminium lath (nominal 40mm deep) provides a strong visual deterrent with the added benefit of excellent sound and insulation properties. Where security is required but a degree of light and ventilation is also required, there is an option of a vented lath profile where the vents are punched into the lath joint which allows light and ventilation to pass through the curtain with the shutter closed which then allows the vents to be closed off, when the shutter is in its fully locked down position.
Standard curtain colours – White, Brown, Cream
Where Higher Security Domestic, Office, Retail and Commercial applications are required, a twin wall Extruded aluminium lath profile (nominal 38mm to 60mm deep) is used. Exceptionally strong profiled lath enables the curtain to wrap into a small, unobtrusive shutter box ranging from 165mm to 305mm depending on size and application.
Standard curtain colours – White, Brown, Cream.
Polyester powder coated finishes are also available to a standard RAL/BS colour at an additional cost
Extruded profile Aluminium bottom rail incorporating a rubber bottom seal, can also be fitted with an extruded reinforcing angle. Where required the bottom rail can be fitted with a recessed centre lock and fully enclosed locking bars within the bottom rail profile for added security.
Extruded Aluminium channel with box section, for fixing and reinforcement complete with a high density 5mm pile brush seal inserts. Available in a range of depth and sizes to suit various security, size and fitting applications.
Die Cast Aluminium, zinc plated steel endplates ranging between 165mm to 305mm depending upon size and application, available in white, brown or powder coated finish to a standard RAL/BS colour. Enclosing the shutter box is a two piece aluminium housing cover, available in white, brown or powder coated to a standard RAL/BS colour.
Various operating methods are available depending upon size and individual applications:
- Manual/Geared Belt
- Rod and Crank Handle
- Push up/Pull Down via counterbalance spring assist, complete with key lock to bottom rail
- 240V electrical tubular motor, with or without manual override
As Standard on all shutters fitted over doorways and shutters fitted over servery and Reception areas where out of balance static force exceeds 200 newtons, an Anti-Fall back device will be fitted in the event of a serious mechanical failure.